RISC-V Processor

The part that does the thinking.
The processor is what a computer or robot actually computes with. Without one in its processor slot, a machine will not start.
This is the 64-bit RISC-V processor. It runs the Linux system the computer ships with, and every card, module and drive documented in this manual is built for it.
Also see the Z80 processor.

Starting Up

Build the machine as described in getting started, using these parts:
- 1x computer
- 1x RISC-V processor
- 1x Linux firmware flash memory
- 1x Linux root file system hard drive
- 3x 4M memory
Power it, turn it on and wait until you're prompted for a login.
Login prompt
Enter root as the user name to log in with and press enter. Well done, you now have a computer that's ready for use!
You can now add more devices, depending on what you want to use your computer for. For information on how to control devices, have a look at the HLAPI manual entry.